Termites do more damage in the United States each year than fires and storms combined.
They are a threat to property owners across 70 percent of the world and in every part of the United States with the exception of Alaska. Infrared cameras are considered one of the most advanced and accurate tools known for determining and documenting subterranean termite damage and moisture damage in buildings. Results are instant and the thermal images are easy to understand and can serve as irrefutable proof in lawsuits.
Pest and termite practices recommended by the National Pest Control Association are called “Integrated Pest Management” or IPM. The concept is simple: to find the nest and eliminate it. However, this is easer said that done. One of the most effective tools to a pest professional is infrared (IR) imaging.
Certified IR imaging has enhanced the standard of IPM in several dramatic ways:
Fast – Certified Infrared inspections yield immediate information
Accurate – Able to pinpoint the location of hard to find problems, like above-ground subterranean termite nests
Reliable – Provides data that can help determine live infestations and the extent of damage
Convenient = It takes less inspection time, also our inspections are safe & non-destructive
Affordable – Our pest inspection cost just a fraction of what you have currently invested in termite or pest treatment – not to mention the existing damage
Our inspection has the ability to reveal potential pest invasions, moisture intrusion that can lead to a host of problems. A Certified Infrared Thermography Report can provide additional value to keep your home sound and always ready for whatever you choose do now or in the future. Let at us at Bruni Infrared help you with a Certified Pest Thermographer that will navigate through these dangerous waters by providing you and your Pest Company with valuable data to correct your live infestation as well as keep them from damaging re-infestations.
Infrared Moisture and Mold Detection
Discover moisture problems early through infrared technology.
Excessive moisture destroys structural integrity and creates huge, expensive problems like mold and mildew which can cause serious health concerns. Far too often, these problems are not obvious until it’s too late. Our Certified Infrared Moisture Survey can save a lot of money and increase your building’s lifespan dramatically.
Mold and Mildew can be a health hazard as well as being an expensive project. Our Certified Infrared Inspectors can locate with surgical accuracy so that you can repair only what is necessary and that will save you money. Be sure your family is breathing clean air. Call for a low cost annual mold and moisture scan now.
Spot Problems Before they become visible with our Thermo-Scan for homeowners and infrared moisture inspection reports for our commercial clients.
This service has the ability to reveal:
Potential Pest Invasions – Infrared will show entry points not visible in a normal inspection
Moisture Intrusion– water entering the structure that can lead to mold
Hidden Water Damage – easily spot additional damage without the need for destruction
Roof Moisture – Solar heat plays a big part in the effectiveness of roof moisture detection
A/C and A/C Duct Leaks – save big money on energy bills
Electrical Hot Spots – pinpoint problems faster
Foundation Cracks – Infrared shows the entire extent of potential damage
Window, Door and Floor Leaks – including window and door seal issues—just to mention a few.
Whether it be the pool of water you found on the floor, or you find your water bill increasing, or you just smell something in your home or office that concerns you, these can be signs that you may need our help. Let a Bruni Infrared Certified Pest Thermographer help you find hidden moisture early and other conditions that can harm you and your home and cost you a lot of time and money. Call us and talk to a Certified Thermographer now
It takes quality equipment and experience to detect hidden leaks.
Our Certified Infrared Leak Detection inspectors use state-of-the-art equipment to save homeowners time and money. We can find leaks behind walls, ceilings and floors. While it is true that leaks are more common in older properties, the truth is any property can have leaks or moisture problems. Poor construction, corrosion, and in many cases ground movement, can cause unexpected pipe damage at any time. We find problems that over time, will make repairs more costly. If you can’t find it, you can’t fix it and that will cost you money.
Fast service is another large part of choosing a leak detection company. Our Certified IR Thermographers are Fast, Reliable, Accurate, and Affordable.
Our Certified infrared Inspection and consultation can diagnose:
Plumbing Issues – Infrared can assist in locating blockages in pipes behind walls
Water Leaks– Detect the origin of otherwise hidden compromises
Pool Leak Detection – Pool losing water? Infrared can help!
Roof and Ceiling Leaks – save time on commercial and residential jobs
Quantify Repairs – proof for your clients
No more ripping up walls and floors looking for leaks, our non- destructive inspection protocols protect your home from water and inspection damages.
Let at us at Bruni Infrared help you with a Certified Thermographer that will locate the source of the leak. Call and talk me Bart Bruni level II Certified Pest Thermographer, State Certified Termite and Pest Management Consult with over two decades of experience with inspection structures for leaks
Infrared Energy Scan
Infrared Energy Scan is a proven diagnostic technique recommended by the US Department of Energy for identifying areas of heat loss. Considering your heating and cooling load can be up to 50% of your actual energy bill, a thermal scan of your home can identify where those wasted dollars are going-no matter what type of heating or cooling system you have.
Thermal infrared imaging has become a valuable tool in performing infrared energy audits in residential and commercial applications. The infrared camera has the ability to display heat energy as a visual image. This gives you a new “picture” of your energy loss. A $350 to $500 thermal audit can not only discover where energy is wasted, but also pinpoint mold as well as termite or water damage behind the walls. Our inspections provide low-cost, high-value Certified infrared Energy Surveys. Over time these inspections can save you a lot of money off your energy bills.
Let at us at Bruni Infrared help you with a Certified Thermographer that will locate the source of lost energy.
Call and talk to Bart Bruni level II Certified Pest Thermographer, State Certified Termite and Pest Management Consult with over two decades of experience with inspection structures for electrical systems and energy loss.
Home and Building Inspections
Infrared imaging provides important information relating to otherwise inaccessible areas of a residential or commercial building. The infrared camera detects large or extremely small but crucial differences in surface temperature from one area of a house to another. These temperature variations show up on the camera’s view screen as “cold” or “hot” spots, which reveal hidden problems that often cannot be detected in the course of a traditional visual inspection. We visually inspect the suspect area, next we check with a moisture meter and then a motion detector. After which if we have need to go further we use a fiber optic scope into the areas and take photos inside hidden areas.
These problems may include:
Faulty wiring, Breakers and Fuses – Infrared instantly shows electrical problems saving time
Hidden Moisture Intrusion– Detect the origin of otherwise hidden water leaks
Pipe and Duct Work Leaks – Infrared can help locate the source of air, suction and blockages
Roof and Ceiling Leaks – save time on commercial and residential jobs
Forensic Pest IR Thermography to use for cost recovery – proof for your clients
Combined with traditional home inspection techniques, the infrared inspection method reveals substantially more of the house than can be perceived by the naked eye and conventional inspection tools. Many things can’t be seen with only a flashlight.
Let at us at Bruni Infrared help you with a Certified Thermographer that will inspect hidden areas of your new or pre-owned home. Call Bart Bruni level II Certified Pest Thermographer, State Certified Termite and Pest Management Consult and home inspector with over two decades of experience with inspecting Florida properties
Preventative/predictive maintenance (PPM) programs are the best way to manage large electrical systems.
The National Fire Protection Association (NFPA) 70B §11.17.5 suggests that every commercial and industrial building in the United States should have an IR survey at least once a year. Increasingly, insurance companies are requiring IR surveys of electrical and mechanical systems for their insured. Some companies may even offer discounts if you do.
Widely used application of infrared thermography is most popular. No other commercial application has achieved the level of interest than that of electrical infrared thermography. IR and Electric Inspections go together like milk and cookies.
Why certified infrared Electrical inspections are important
Insurance Savings – Maximize your claim with quantifiable results
Reduce Downtime & Risk – Savings in time equals savings in money, plus it’s safer
Increase lifespan of components – crucial data that can allow for maximum planning
Minimize Repair Costs = Fix only what needs to be fixed
Comply with codes and regulations – Prevention is the key
Roof Moisture Surveys
INSPECTION – The Bruni Infrared initial inspection and consultation are no charge, and is a visual inspection in the daylight hours to familiarize us with your problem. Then if you decide you would like to know more about the condition of your roof, we will arrange a night time inspection when your roof is in the process of cooling. Infrared thermal technology can easily detect water trapped in your roof. This type of information will save you time and money if you are repairing your roof, by detecting exactly where the problem areas are, or confirm that reroofing is necessary.
SPECIFICATIONS – A qualified member of Bruni Infrared inspector will return to the roof the next day. He will take exact measurements, determining exactly where the trapped water is located, and we can produce a Computer Aided Design (CAD), providing you with exact information as to how much of your roof is effected. This information will assist you in making the important decision to reroof or repair your existing roof. Bruni certified infrared inspector will prepare a complete report that includes photos of roofing problems, infrared images showing exactly where the roof failed, and a scale drawing of your roof. This comprehensive report will give you the important information you need to know when discussing your project with the roofing contractor of your choice.
CONSULTATION – Bruni Infrared provides expert roofing consulting, with a service that guarantees the best repair decision. We prepare the tailor made specifications, to meet your budget and your needs. This includes an American Institute of Architects (AIA) contract, and a complete detailed bid package for you to present to your roofing contractor. We provide the roofing contractor of your choice with all the specifications and drawings to quickly obtain building permits, and personally inspect the materials and workmanship as the roofing project is taking place. After the roof is installed, we provide you with infrared and visual inspections necessary to maintain your roof warranty.
Discover The Future
Discover the future today with Bruni Infrared Inspections.